Touchscreen Remote Buttons

When the remote is attached on the gimbal and the gimbal is powered on, the remote will automatically power up and pair with the gimal, and the gimbal will charge the remote.

When separated from the gimbal, the remote can be used for remote control and real-time preview.

• Side Button

Single press:

- Start AI tracking (used in preview with tracking target selected)

- Pause/Resume AI tracking (used in preview during tracking)

Double press: Recenter the gimbal

Triple press: Forward-facing/Backward-facing phone position

Press four times: Ultra-Wide-Angle Mode

Press five times: Start/Complete remote controller re-pairing

Press seven times: Clear remote connection

Long press: AI tracking calibration

• Mode Button

Single press: Switch working mode

Triple press: 360° infinite pan rotation

Press five times: Auto gimbal calibration

• Zoom Lever

Lever up/down: Zoom in/out

*Used within Hohem Joy app after Bluetooth connection.

• Shutter Button

Half-press: Auto focus[1]

Single press: Take a photo or start/stop recording[2]

Double press: Photo/Video[1]

Triple press: Front/Rear camera[1]

Long press: Power on/off the remote[3]

1.Used within Hohem Joy app after Bluetooth connection.

2.Bluetooth connection needed.

3.When the remote is attached to the handle, it will power on/off the gimbal simultaneously.

• Joystick

Push up/down: Tilt up/down

Push left/right: Pan left/right

*In AI tracking calibration mode, use the joystick to adjust the preview frame.