Touchscreen Interface

Status Bar

Status Bar Icons on the touchscreen from left to right are as following: Gimbal Battery Level, Bluetooth Connection Status, AI Tracking Status, Remote Connection Status and Remote Battery Level.

Homepage Menu

(1)Roller Control: includes Roller Function, Roller Settings, Fill Light Settings and and Fill Light Switch.

Roller Function: You can choose which function the side roller controls. The default is focus control.

Roller Settings: You can set the side roller to reverse its direction.

Fill Light Settings: Used to adjust various parameters for CCT and RGB lighting.

Light Switch: Turn the fill light on or off directly

(2) Motor Balance: Enter to view the real-time output torque status of the three motor axes.

（Green: Good balance，Yellow: Slight imbalance，Red: Poor balance, requiring re-adjustment）

(3) Working Mode: Enter to switch between the following working modes: PF Mode, PTF Mode, POV Mode and Custom Mode.

(4) Scenario: Enter to choose from the following shooting modes: Auto Rotation, Ultra-Wide Angle Mode, Panoramic Shooting, Timelapse.

(5) Joystick: Used to adjust the speed and direction of the tilt and pan axes.

(6) A/B Setting:  Set AB points and the duration for trajectory rotation.

(7) Follow Speed: Set the motor's follow speed to Slow/Medium/Fast.

(8) More Settings: From top to bottom, you can adjust: Language Settings, Gimbal Sound Prompt, Motor Strength, and Level Calibration.

AI Imaging Preview

Back to first-level menu and swipe right, you can see the real-time AI imaging preview.