Tutorials

Click here to view iSteady XE tutorials-Unboxing and Getting Started.

Unboxing and Getting Started

The iSteady XE does not require activation; it's ready for use right out of the box.

What's In the Box

Let's see what's in the box of iSteady XE:

① Gimbal *1

② Magnetic Fill Light (Optional) *1

③ Tripod *1

④ USB-C Charging Cable *1

⑤ Storage Pouch *1

⑥ User Manual *1

Charging Instructions

Before using the gimbal, make sure it's fully charged.

• Charging the Gimbal

Connect a USB adapter (Not included, 5V-2A for best) to the charging port with the provided Type A-Type C charging.

• In Charge

The flashing Mode (Power) indicator indicates it is in charge.

• Fully Charged

4 indicators simultaneously retain steady indicating it is fully charged.

• Check the Battery Level

Long press the function button, the mode indicator will flash. After flashing, the number of solid LEDs indicates the battery level.

Getting Started

• Mount a Tripod

Align the tripod with the bottomb 1/4 inch screw port and securely attach it by turning it clockwise.

• Unfold the Gimbal

Expand the gimbal. Tighten the knob by turning it clockwise.

Tips：

The gimbal would not function properly if the knob was not tightened.

Mounting A Phone

Rotate the phone clamp to make the "hohem" logo facing upward.

Position the phone with the camera facing left, slide one side of the phone clamp against the phone, and pull the other side of the clamp to secure the phone in place.

Ensure the phone is centered approximately before powering on.

Tips：

Ensure your phone is centrally clamped to the rubber pads, otherwise the gimbal would vibrate or turn off automatically. (If your phone case is bulky, it's recommended to remove it before installation)

Powering on or off Your Device

Press and hold the M (power) button for 3s to power on/off the gimbal.

Bluetooth Conection

1. Open your phone's Bluetooth settings.

2. Search for devices with the prefix "XE-" (the gimbal's name) and select it to initiate the pairing process.

3. Follow the on-screen prompts to connect to the "XE-" device. Click on "Pair" or follow any other instructions that appear.

Once the pairing is successful, the Bluetooth indicator on the gimbal will turn green, indicating a successful Bluetooth connection.

Bluetooth Clearing

Push the zoom lever upward and simultaneously press and hold the shutter button for 5s. The Bluetooth indicator goes off, indicating that the Bluetooth has been cleared.

Tips：

Follow the Bluetooth connection steps to reconnect the Bluetooth.

Serial Number

On the surface of the device, or under the barcode on the outer box.

LED Indicator

iSteady XE introduces mode and Bluetooth indicator lights that display different colors and statuses in various situations, as follows:

① Working mode indicator (Battery level indicator)

Display gimbal mode: If one of working modes is in use, its mode light will be in solid green.

Display battery level: Long pressing Function Button to check out battery level. (The more lighting indicators you see, the higher the battery level)

Display charging status: Light flashing means gimbal in charg; Light staying on means gimbal is fully charged.

Others: Continous flashing when calibrating the gimbal.

② Bluetooth indicator

a. Color indicates the status of the gimbal

Light off: Bluetooth disconnected

Green: Bluetooth connected

Pulse red: Low battery warning

Blink red quickly: Low-battery shutdown countdown

Solid red: Error warning

Flashing red with beep sound: Overloading

b. Blinking indicators of remote control * status

Blink yellow and green alternatively: Pairing

Blink yellow: Paired

* Remote control is sold separately.